fiber optic transceivers, fiber optic cables, fiber optic network solution, fiber optic network, fiber optic products, data center solution, data center optic network, direct attach cables, active optical cables

Welcome to FiberOnSale - The World's Top Optical Network Products Supplier For Data Center Solution & Fiber Cabling Solution!

4 Channels CWDM MUX/DEMUX, IL=1.5dB, LC

Availability: In stock

$190.00

Quick Overview

Duplex CWDM MUX/DEMUX
4 channels, LC
IL=1.5dB
$190.00

Details

Multiplexer (MUX) and demultiplexer (DEMUX) are combined together into a single piece of equipment for bi-directional data transmission over two fibers.
FiberOnSale CWDM Mux/Demux is a passive technology, it allows for any protocol to be transported over the link, as long as it is at a specific wavelength (i.e. T1 over fiber at 1570nm transported alongside 10Gbps Ethernet at 1590nm). This allows for long-term future proofing of the networking infrastructure because the multiplexers simply refract light at any network speed, regardless of the protocol being deployed. FiberOnSale provides a complete portfolio of CWDM Mux Demux and Optical Add Drop Multiplexer (OADM) units to suit all applications such as: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. And we provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.

Front Panel Details

Wavegate front panel detaild example

A. Common port: ● LC, SC, ST and FC connectors available. B. Standard port 1310nm: ● Allows a legacy 1310nm signal to pass. That is to say, it can carry LR optics, LX optics etc. ● LC, SC, ST and FC connectors available. C. Standard port 1550nm: ● Allows a legacy 1550nm signal to pass. That is to say, it can carry ER optics, ZR optics, LX optics, ZX optics etc. ● LC, SC, ST and FC connectors available. D. Mux/Demux port for specific wavelengths: ● LC, SC, ST and FC connectors available. ● Compliant with the ITU G.657A1 standard as default. E. Express port: ● Enables the cascading of two CWDM MUX/DEMUX modules, doubling the channel capacity on the common fiber link. ● Channel Isolation is 15dB as default, 16dB ~40dB available on request. ● LC, SC, ST and FC connectors available. F. Monitor port: ● Connects measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs. ● When finished monitoring, disconnect the instruments and the network is left undisturbed. ● LC, SC, ST and FC connectors available. ● Tap percentage is 5% as default, 1%, 2%, 3%, or 10% available on request.

NOTE: ● Actual layout depends on the chosen connector type as well as other factors. However, the principal scheme stays the same ● We provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice, need more details, please contact at info@FiberOnSale.com ● When using with 1310nm legacy SDH/SONET, CWDM wavelengths 1270, 1290, 1310, 1330 and 1350nm should not be used. ● When using with 1550nm legacy SDN/SONET, CWDM wavelengths 1510, 1530, 1550, 1570 and 1590nm should not be used.

Item Details

● 4 channels CWDM mux and demux in one 1U Rack ● Com port is duplex ● 1U 19 inch Rack Mount Housing ● It is equipped with configuration ports like Monitor, Express port according to customer choice (see options) ● Front panel is equipped with adapters according to customer choice (see options) ● Passive, no electric power required. (MTBF ca. 500 years) ● Low insertion loss ● Simple to install, requires no configuration or maintenance ● ISO 9001 manufacturing facility

Mechanical Details for Housing

Note: Please, note that the drawings shown here only show the dimensions and do not the specific configuration of the module.

Specification

Parameters Unit CWDM Module
Wavelength Range nm 1260 ~ 1620
Channel Center Wavelength nm 1270 / 1290 / … / 1610 or 1271 / 1291 / … /1611
Channel Spacing nm 20
Channel Passband nm λc ± 7.5
Channel No. λ 2 4 8 16 18
Insertion Loss dB ≤0.8 ≤1.5 ≤2.5 ≤5.2 ≤6.4
Adjacent Channel Isolation dB ≥ 30
Non-adjacent Channel Isolation dB ≥ 40
Wavelength thermal stability nm/℃ ≤ 0.003
Insertion loss thermal stability dB/℃ ≤ 0.005 ≤ 0.007 ≤ 0.008
PDL dB ≤ 0.1 ≤0.15 ≤ 0.15 ≤ 0.20 ≤ 0.25
Polarization mode dispersion ps ≤ 0.1 ≤ 0.15
Directivity dB ≥ 50
Return loss dB ≥ 45
Optical Power mW ≤ 500
Operating Temperature -10 ~ +70
Storage Temperature -40 ~ +85
Relative Humidity % 5 ~ 95
Dimension   ABS Box or LGX Box or 1U(2U) Rackmount
Note: 1. Customization is available.
2. We can make low insertion loss solution as well. For more information, please feel free to contact at info@fiberonsale.com.
3. Specified without connector, and add an additional 0.2dB loss per connector.

Additional Information

product_view_right_contents No
Date Of Delivery No
Control panel N/A
Connector N/A
IL IL=1.5dB
Fiber Dual Fiber
Wavelength customized
Connector LC
Monitor N/A
Optional No
Channels 4 Channels