FiberOnSale News
Fiber optic connector common knowledge
11/13/15 | Technical Article | FiberOnSale.comFiber optic connectors are plugs at both ends by an optical fiber and fiber composition, plug by locking pin and peripheral structures. Depending on the locking mechanism, fiber optic connectors can be divided into FC type, SC type, LC type, ST type and KTRJ type.
A detailed description of several common optical fiber connector
10/13/15 | Technical Article | FiberOnSale.com
US Conec Release MTP-16 connector
10/9/15 | Industry News | FiberOnSale.comLeading technology provider of fiber optic connectors - US Conec, launched MTP-16 high density parallel optical fiber connector on this ECOC. Based on US Conec of MT Elite ferrule technology, high density and low insertion loss characteristic of the new MTP-16 connector to make it more suitable for structured cabling systems, also suitable for the new 8-channel QSFP+ optical modules and QSFP28 direct support 16X25Gbps applications.
Fiber jumper instructions for use
9/1/15 | Technical Article | FiberOnSale.comBoth ends of the optical fiber jumper wavelength transceiver module must be consistent, meaning that both ends of the fiber must be the same wavelengths of light module, a simple distinction is the color of the light module to be consistent. Under normal circumstances, short-wave optical module using multimode fiber (orange fiber), long wavelength module uses single-mode fiber (yellow fibers), in order to ensure the accuracy of data transmission.
MT ferrule using conventional way to clean it?
7/28/15 | Technical Article | FiberOnSale.comOPTIPOP series cleaning unit is designed for fiber optic connector design of yin and yang, it can also be applied to single ceramic ferrule. OPTIPOP cartridge and cassette cleaner can be added using a replaceable cleaning cloth, cleaning can be long-term use than traditional cleaning methods, the lower cost clean.
Why MTP connector is described as a high performance MPO connector?
7/27/15 | Technical Article | FiberOnSale.comThrough a specially designed MTP connector performance and availability were improved compared with MPO connectors. This design feature MTP is unique and protected by patents.
What is a MTP connector?
7/26/15 | Technical Article | FiberOnSale.comMTP connector is an innovative design with multiple high performance MPO connector with respect to the average for the MPO connector, MTP fiber optic connector on the optical and mechanical properties have been strengthened. MTP connectors are fully compliant with all MPO connector professional standards, including EIA / TIA-604-5 FOCIS 5 and IEC-61754-7.
What is MT ferrule?
7/24/15 | Technical Article | FiberOnSale.comMT namely mechanical docking transmission, multi-core ferrule number (usually a 12-pin). Performance by an optical fiber connector alignment accuracy decisions, and alignment accuracy can continue after the connection is stable. Ultimately, the alignment accuracy is eccentricity and pitch as well as matching precision guide pins and optical fiber to decide. If in the production process can reduce the deviation of the guide pin and molding process, any one MPO connector performance can be improved.
What is the MPO connector?
7/23/15 | Technical Article | FiberOnSale.comMPO is a "multi-fiber pull off" the abbreviation. This connector ferrule has more than one core, by mechanical means snaps into place.
Optical Connector
6/24/15 | Technical Article | FiberOnSale.comOptical connector, also known as fiber optic connector, commonly known as joint activities. It is used for the detachable (activity) connected between the optical fiber and optical fiber device. It is the two end precision optical docking, so that the light energy emitted optical output can maximize the receiving fiber coupled to go, and effects due to their involvement optical link and to minimize the impact on the system.